Electra IC ARINC664 products: IP core, end system, switch

Electra IC ARINC664 products: IP core, end system, switch
Show Article Summary

Quick answer: Electra IC’s ARINC664 product family consists of an IP core, an End System unit, a network switch unit and a small form factor PCIe card for aircraft networks built to ARINC664 Part 7 (also known as AFDX). ARINC664 Part 7 is the standard that provides high-speed, deterministic Ethernet communication between avionics units in modern commercial and military aircraft. The company also offers a separate IP core for ARINC429, the previous-generation avionics data bus.

ARINC664 End System IP core

According to the official product page, the core implements the ARINC664 Part 7 standard and provides the interface between the aircraft’s line replaceable units (LRU) and the ARINC664 network. The core is embedded into FPGA-based avionics computers. The company showcased this core at DSA 2026 together with a commercial off-the-shelf (COTS) avionics card solution for redundant, high-speed in-aircraft communication.

Hardware products: end system, switch and PCIe card

Three hardware products are positioned around the IP core. The ARINC664 End System Equipment is a box-level product that connects LRUs to the network. The ARINC664 Switch Equipment handles the switching function within the network. The small form factor PCIe card adds a single dual-redundant ARINC664 Part 7 channel to embedded computers; the company describes the card as a rugged, reliable data bus interface for aviation applications.

Electra IC ARINC664 end system equipment in a blue enclosure
The ARINC664 End System equipment connects aircraft LRUs to the deterministic Ethernet network. Photo: electraic.com
Small form factor PCIe ARINC664 card next to a coin
The PCIe ARINC664 card delivers a single dual-redundant channel in a small form factor. Photo: electraic.com
ProductTypeFunction
ARINC664 End System IP CoreIP coreLRU-network interface (inside FPGA/ASIC)
ARINC664 End System EquipmentBox-level productEnd system connectivity
ARINC664 Switch EquipmentBox-level productNetwork switching
PCIe ARINC664 CardAdd-in cardARINC664 channel for embedded computers
ARINC429 IP CoreIP coreLegacy avionics data bus interface

What does the ARINC429 IP core offer?

ARINC429 is the unidirectional, low-speed avionics data bus standard that has been used in civil aviation for decades. Electra IC’s core consists of receiver (Rx) and transmitter (Tx) processing blocks, a controller block and memory interfaces communicating over AXI. This core complements the ARINC664 solutions in modernization projects that require compatibility with legacy avionics units.

ARINC429 IP core promotional image with airliner and integrated circuit theme
The ARINC429 IP core targets civil avionics modernization. Image: electraic.com
Electronic boards inside the ARINC664 switch equipment with its cover open
The ARINC664 Switch equipment handles the switching function within the aircraft network. Photo: electraic.com

Market context: why does a local avionics network solution matter?

ARINC664 end system and switch equipment is held by a small number of manufacturers in the global market; developing these products domestically provides supply security for indigenous air platform and modernization programs. Electra IC presented its avionics networking portfolio to defense industry customers at DSA 2026 and SAHA exhibitions; its reference list includes Turkish firms working in air platform electronics. Which platforms the products are used on is not officially disclosed; no speculation was made in this area.

Test side and product family connections

The company’s Avionics Interface Converter is a multi-purpose card designed for testing ARINC664 and MIL-STD-1553 interfaces. DO-254 compliance processes for avionics products are supported by the company’s verification and functional safety services. A full inventory of the family’s products is available in the product guide.

Frequently asked questions

What is ARINC664 Part 7?

It is the section of the ARINC664 aircraft data network standard that defines the deterministic, dual-redundant avionics Ethernet profile; it is also known by the trade name AFDX.

Who uses Electra IC’s ARINC664 products?

User and program names are not officially disclosed; the company presents the products to defense and aviation customers at exhibitions such as DSA 2026.

What is the difference between ARINC429 and ARINC664?

ARINC429 is a unidirectional, low-speed, point-to-multipoint data bus; ARINC664 Part 7 is a switched, high-speed, dual-redundant Ethernet-based network.

How much do the products cost?

Not officially disclosed.

Which platforms do the IP cores run on?

The company states that the cores can be adapted to FPGA and ASIC targets; no specific device family restriction is given on the product pages.

Sources and verification note

Technical definitions were compiled from the company’s official product pages, and exhibition information from Defensehere’s DSA 2026 report. User and price information was not written because it has not been disclosed.

  • https://www.electraic.com/products/design-ip-cores (Accessed: August 13, 2026)
  • https://www.electraic.com/products/embedded-systems (Accessed: August 13, 2026)
  • https://www.electraic.com/products/electronic-cards (Accessed: August 13, 2026)
  • https://defensehere.com/en/electra-ic-highlights-solutions-at-dsa-2026/ (Accessed: August 13, 2026)

Related Posts