Curtiss-Wright Electronic Warfare Components

Curtiss-Wright Electronic Warfare Components
Show Article Summary

Curtiss-Wright does not build complete electronic warfare (EW) systems. It supplies the fast signal-processing cards, digital radio frequency memory (DRFM) modules and tuner boards that go inside other companies’ jammers, radar warning receivers and signals-intelligence kit. The products come in OpenVPX, a standard card format, so a prime contractor can mix and match.

Electronic warfare means detecting, imitating or disrupting an adversary’s radar and radio signals. To do that, a system has to digitize an incoming radio wave at very high speed, then process it in a very short time. Curtiss-Wright’s Defense Solutions unit sells that digitize-and-process layer as rack-mount boards. Readers new to the subject can start with our report on Türkiye’s MEHDEN-26 electronic warfare trials to see what these systems are asked to do in the field.

What Is DRFM? A Memory That Fools Radar

DRFM stands for Digital Radio Frequency Memory. The principle is simple: capture an incoming radar pulse, alter it slightly, and send it back. The radar receives a distorted copy of its own signal and misjudges the target’s range or speed. Success depends on two things: how wide a slice of spectrum you can sample, and how quickly you can respond.

Curtiss-Wright has been selling in this niche since the early 2010s. Its CHAMP-WB-DRFM set pairs a 6U OpenVPX processing board built around a Xilinx Virtex-7 FPGA with a converter module sampling at 12.5 billion samples per second. In 2015 the company introduced, with Tektronix Component Solutions, a 25 GS/s receiver and transmitter board set able to sample bandwidths up to 15 GHz directly. Those are card-level specifications; what a finished system achieves also depends on its antennas and the rest of the chain.

Four Products at a Glance

ProductFormatWhat it does
CHAMP-WB-DRFM6U OpenVPXWideband DRFM: Virtex-7 FPGA processor plus a 12.5 GS/s converter module
25 GS/s receiver/transmitter set (with Tektronix)OpenVPXDirect RF sampling of bandwidths up to 15 GHz
MPMC-9323 / EWS (with Silver Palm Technology)Compact mission computerEW and RF-tuner functions in one low size, weight and power box; supports VITA 67.3 RF connectors
3U VPX EW system (with Leonardo DRS tuner card)3U VPXFour configurable tuner channels plus an Intel Xeon D based CHAMP-XD1 processing card; MIL-STD-810 and MIL-STD-461 qualified

The table is drawn from the company’s published product announcements. Whether each model is still in production is a question for the manufacturer’s current catalogue.

Latency, Size and Heat

Three constraints shape EW card design. The first is latency: send the radar its copy late and the deception fails, because the radar is listening for the echo of its own pulse. That is why the work is done in FPGAs, chips that can be reconfigured at the hardware level, rather than general-purpose processors. The second is size. Space inside an aircraft or vehicle is limited, which is why compact formats such as 3U VPX are popular. The third is environment: the boards are qualified to military standards for shock, temperature and electromagnetic compatibility.

The commercial logic follows. The same card, running different customers’ software, becomes a different system. For a prime contractor that is usually faster and cheaper than designing boards from scratch.

Why OpenVPX Matters

OpenVPX is an industry standard that defines the size, connectors and electrical interfaces of rugged boards. Because it is a standard, an EW integrator can take a processing card from one vendor and a tuner card from another and slide both into the same chassis. Curtiss-Wright’s 3U system built around a Leonardo DRS tuner is a good example: two companies that also compete in embedded computing end up in the same box.

Who Uses It?

The company rarely discloses which forces or platforms use its EW boards, and the field is secretive by nature. What it has said publicly is limited. In its fourth-quarter 2025 results it cited international sales of embedded computing and flight test instrumentation within aerospace defense. For 2026 it guides aerospace defense sales up 9% to 11%. That figure covers all aircraft and drone programs, not EW alone.

Financial Context

The Defense Electronics segment had sales of about $1.02 billion in 2025, up 12%, at an adjusted operating margin of 27.3%. Company-wide sales were about $3.5 billion. For 2026 the segment is guided to $1.055 billion to $1.075 billion. In third-quarter results published on November 4, 2026, segment orders rose 27% from a year earlier. The full segment breakdown is in the company’s February 2026 earnings release.

Competitors

CompanyCountryNote
Mercury SystemsU.S.Secure processing modules for radar and EW
Leonardo DRSU.S. (Leonardo group)Both a rival and a tuner-card partner
ASELSANTurkeyOne of the main developers of Turkish EW systems

FAQ

Q: Does Curtiss-Wright sell a complete EW system?
A: Generally not. It sells cards and modules; the prime contractor integrates the system.

Q: What does a DRFM do?
A: It records an incoming radar signal, modifies it and sends it back, misleading the radar about the target’s range or speed.

Q: What does GS/s mean?
A: Billions of samples per second. A 25 GS/s converter takes 25 billion measurements a second; the higher the rate, the wider the band it can capture.

Q: Who buys these boards?
A: The company rarely names programs or customers, so we do not publish a user list.

Q: What is the advantage of OpenVPX?
A: Boards from different vendors fit the same chassis, so integrators avoid lock-in to one supplier and upgrades are simpler.

Sources: Curtiss-Wright Defense Solutions product pages and press releases (CHAMP-WB-DRFM, 25 GS/s board set, MPMC-9323/EWS, 3U VPX EW system); Military & Aerospace Electronics; Army Technology; Curtiss-Wright fourth-quarter 2025 and third-quarter 2026 results (SEC 8-K); Wikipedia (company background, cross-check).

Leave a Comment

Your email address will not be published. Required fields are marked *

Related Posts